Siser EasyWeed Fluorescent Orange

Siser EasyWeed™ Heat Transfer Vinyl 
Specifications: PU Composition • Pressure sensitive backing • Semi-gloss finish • 90 Microns/3.5 Mils • 45°/60° blade • Can be layered
Due to the nature of these sheets they do vary a bit by 1/4

CSPIA Certified
– Easy weeding and transferring
– Adheres to 100% cotton • 100% uncoated polyester • Poly/cotton blends • Leather

• Cut in reverse
• Weed excess material

HEAT PRESS INSTRUCTIONS:
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

HOME IRON INSTRUCTIONS: 
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold

CARE:
Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean